Knowing that birds are using your nest box to raise a family is great, but imagine if you could watch them building the nest and feeding their young. Miniature surveillance cameras are now available, which allow you to do just that. The cameras are affordable and come in kit form, needing no particular skill to install. Once the camera is in place, you can watch the real-life drama unfold on your TV.

Advertisement

Kate Bradbury explains how to make a bird box in our No Fuss video guide, below.

Find out how to install a nest box camera, below.

You Will Need

  • Bird box camera kit
  • Drill
  • Drill bit kit
  • Hammer
  • Screwdrivers

Total time: 1 hour


Step 1

Install a nestbox camera - drilling a cable hole in the box

Install a nest box camera - drilling a cable hole in the box

More like this

The camera is fixed to a cable link that is best threaded through a hole in the box side. Use a drill bit that makes a hole wide enough to fit the lead and plug through.


Step 2

Install a nestbox camera - feeding the cable through the hole

Install a nest box camera - feeding the cable through the hole

Carefully thread the cable into the box through the hole you've drilled. Make sure you don't damage the plug by forcing it through - if necessary, widen the hole instead.


Step 3

Install a nestbox camera - fitting the camera

Install a nest box camera - fitting the camera

Mark the camera position according to the instructions, to ensure it will focus correctly. Drill small holes so the screws go in easily. Then screw the camera to the wall of the box.


Step 4

Install a nestbox camera - securing the wire

Install a nest box camera - securing the wire

Advertisement

Connect the camera according to the instructions and plug into your TV to check the focus. Secure the wire with clips to prevent pulling, hang up the box and enjoy the show.

Advertisement
Advertisement
Advertisement